Nikwax TX.Direct® Wash-In is the market leader. It is easy and quick to apply in a washing machine, and its highly Durable Water Repellency (DWR) develops on air drying. The washing machine application ensures that the treatment goes right through the garment, treating seams, tapes and cords, as well as the fabric. Also, as the need for tumble drying is removed, this saves energy and protects more vulnerable, older, garments from heat. Nikwax TX.Direct® Wash-In has been specifically designed and optimized for breathable waterproof garments; it leaves a flexible water repellent treatment on individual fibers allowing moisture vapour to pass through, maintaining breathability.
Breathable waterproof garments are most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric absorbs water, the garment can lose up to 70% of its breathability. Therefore, the Durable Water Repellency (DWR) on the outer fabric of your jacket must be maintained to ensure comfort. It will eventually wear off and need to be renewed with Nikwax TX.Direct®.
WHY YOU SHOULD USE IT:
Your raingear could be soaking up water just because it is dirty. First, try cleaning it with Nikwax Tech Wash®, and if it is fairly new, or recently re-waterproofed, the Durable Water Repellency (DWR) will be revitalized just from cleaning. But, once the garment has been thoroughly worn, you will need to add DWR, using Nikwax TX.Direct®, after cleaning first with Nikwax Tech Wash®.
WHEN YOU SHOULD USE IT:
When we work hard, we sweat. The evaporation of sweat cools us down and keeps us comfortable. But, when it rains we want to avoid getting wet, so we put on waterproof outerwear to keep us dry.
The waterproof fabric must allow moisture vapour to pass through it, or ‘breathe’; otherwise our sweat cannot evaporate, causing us to overheat and get wet from condensation. Additionally, if the outer fabric of your garment absorbs water and ‘wets out’ its breathability will be reduced, causing you to feel clammy and wet.
Nikwax TX.Direct® adds Durable Water Repellency (DWR), which prevents water absorption, whilst maintaining breathability, keeping you dry and comfortable.
HOW YOU SHOULD USE IT:
Use Nikwax TX.Direct® Wash-In in a washing machine …
For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash® in a separate wash cycle. No need to dry item(s) before waterproofing.
Top Loading Machine Wash:
1. Place maximum of 3 clean garments in washing machine.
2. After the machine has filled add 10floz/300ml of TX.Direct®.
3. Set cycle to Heavy and Warm, Low water level.
Front Loading Machine Wash:
1. Remove all detergent build-up from the detergent dispenser.
2. Place maximum of 2 clean garments in washing machine.
3. Use 3floz/100ml per garment.
4. Run 30oC Synthetic cycle and slow spin.
Do not machine-wash garments if taped seams have become dislodged.*
To maintain waterproofing always wash with Nikwax Tech Wash®. Do not use detergents.
*Faulty taped seams sometimes become detached on old or worn garments. They can be re
-stuck using a proprietary clear glue after waterproofing and drying.